Fish pond membrane is particularly suitable for situations where the soil cannot retain water. In some areas, sandy soil can fill a pool of water and quickly leak out. In this case, using anti-seepage membrane has lower costs than traditional anti-seepage foundations, faster construction, and more convenient maintenance in the later stage.

How many years can the fish pond anti-seepage membrane be used?

The fishpond membrane uses new polyethylene as the main raw material, and its service life is greatly extended by adding dual anti ultraviolet and anti-aging ingredients.

0.4-0.5mm is a commonly used specification for fish pond membranes. With proper use, the underground service life can exceed 20 years, and the exposed parts on slopes can last for 6-10 years. The exposed parts on slopes can also be covered with geotextile, resulting in a longer service life.

How many years can the fish pond anti-seepage membrane be used?

Below are the precautions for using fish pond membranes and how to lay them: when renovating a new or old fish pond, the bottom and slopes of the pond should be cleaned thoroughly, such as small stones, tree roots, and reed roots, all of which should be removed. Otherwise, over time, combined with water pressure, the membrane will be punctured.

Laying fish pond membrane is actually very simple. As long as the previous work is done well, laying it later will be much easier. After digging a pond, first compact and level the slope and bottom, with an area of at least 2 acres.

Then we will measure the dimensions, including the length and width of the base, as well as the slope length. I can help you calculate the dimensions, or you can calculate how much square film to use yourself.

The width of the fish pond membrane can be produced from 1 meter to 8 meters, with any length. After laying the membrane, it is overlapped by 10-15 centimeters. The membrane is welded using a welding machine, and all membranes are welded into a whole to achieve better anti-seepage effect.